Moonbeam XL PRO+ USB-C Right Angle to USB-C Right Angle Tether Cable 9.5m/31ft
The Pro+ Collection
 
This cable is a right angle usb-c to usb a that comes with a usb-c right angle adaptor to fit perfectly into your newest usb-c hardware. 
 
Tight Right Angle design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds 
300lb rated crush-proof metal housing 
IPX4 weather sealed  
Power bridge chipset allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors 
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points. 
No power injection points (No need!)
60-day cable failure guarantee
 
In testing there is no speed increase/decrease, with our adaptor set, going from a USB-C to A 3.0 with an A 3.0 to C adaptor. Few cameras support above 5gps transfer speeds. When testing the Sony A1, which supports USB gen 2, there was no difference in performance due to Capture One, controlling the rendering speed based on the computer graphics processing speed. For the fastest shooting results, we recommend using the highest spec Mac Book Pro 16" or a Mac Studio with Capture One 22 which has seen an increase in preview rendering and support for M1 chips.
 
 
To create a Power Bridge for 62ft tethering you must follow the below steps;
 
1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together. 
 
If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries,  you need to start at Step 1 and go in order of the directions to reconnect.
 
Compatible with any camera using a USB-C port including, but not limited to;
 
SONY A-1
SONY A7R4
SONY A7R III
NIKON Z6II
NIKON Z7II
LUMIX S1
LUMIX S1R 
FujiFilm GFX 100
FujiFilm GFX 100s
CANON R5 **must use the latest canon firmware from canon.com**